by Admin
Our Product > Desiccant Air Dryer

Desiccant Air Dryer

เครื่องทำลมแห้งแบบใช้เม็ดสารดูดความชื้น – HHD Series


Introduction
Heated desiccant air dryer uses two identical vessels, Air flow through one vessel until its desiccant has adsorbed all the moisture it can hold Then air flow is diverted to second vessel. Heating elements then dry the saturated desiccant in the first vessel. Dried desiccant will be cooled before it can be used again.

Standard Working Condition

  • Working pressure: 5-10 bar
  • Inlet temperature: <45  ํC
  • Ambient temperature: <45  ํC
  • Pressure dew point: <-40  ํC
  • Purgeloss: 6%
  • Inlet oil content: <0.1 ppm (w)
  • Pressure drop: <0.21 bar
  • Desiccant: activated alumina
  • Switch time: 120 min
  • Control method: PLC controller

Options

  • Dew point as low as -70 ํC
  • Mounted air filters
  • Dew point displaying
  • Molecular sieve desiccant
  • Higher working pressure
  • Special voltages
  • Higher intet temperature up to 50 ํC
  • ASME certificated pressure vessel
  • Stainless steel pipes lines, fittings and vessel

Specifications

เครื่องทำลมแห้งแบบใช้เม็ดสารดูดความชื้น – HHL Series


Introduction
Heatless desiccant air dryer uses two identical vessel filled with desiccant. As wet air flows through one vessel, a portion of dry discharged air is diverted through the second vessel at close to atmospheric pressure, reactivating its desiccant. The moisture-laden purge air is vented to atmosphere. Later, air flow through the vessel is reversed.

Standard Working Condition

  • Working pressure: 7-10 bar
  • Inlet temperature: 45  ํC
  • Ambient temperature: 45  ํC
  • Pressure dew point: -40  ํC
  • Purgeloss: 14.5%
  • Inlet oil content: <0.1 ppm (w)
  • Power supply: 222 V / 1 Ph / 50 Hz
  • Desiccant: activated alumina
  • Switch time: 5-10 min

Options

  • Dew point as low as -70 ํC
  • Mounted air filters
  • Dew point transducer
  • PLC controller
  • Different inlet / outlet connection
  • Higher protection grade up to IP65
  • Molecular sieve + activated alumina
  • Customized dimension for container shipment
  • Stainless steel pipe lines and fittings
  • Stainless steel pressure vessel
  • ASME certified pressure vessel
  • Anticorrosion paint

Specifications

ติดต่อเรา

บริษัท ก้าวหน้า อินดัสทรีส์ แอนด์ เอ็นจิเนียริ่ง จำกัด
55/17 หมู่ 4 ต. บึงคำพร้อย อ. ลำลูกกา จ.ปทุมธานี 12150

090-546-5615
02-159-9861-4
02-159-9860
info@kaowna.co.th
Line ID : @kaowna

ติดตามข่าวสาร

Copyright © 2016 by Kaowna Industry & Engineering Co.,Ltd. – All Rights Reserved

Top